# Questions tagged [frequency-response]

The tag has no usage guidance.

36 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
90 views

### How to explain the peak frequency and resistance relationship in this op amp circuit?

I was studying thid tutorial by Simon Bramble. I changed the original circuit a little bit and this is the subject of our discussion: As you see, R1, R2 and R3 are all 1kOhm. When I run an AC ...
48 views

### General question about convolution and Fourier

I'm working on a system that includes a bunch of elements and I arrived at the following general expression for the output: \mathcal{F}\left\{ T\cdot\left(\left[T\cdot\mathcal{F}\left\{ E_{1}\right\...
43 views

### Improve the frequency of Current Source Howland effect Op-Amp

I need help on a Howland Effect circuit with a current source purpose with an output of 600mA and a constant gain throughout a range of frequencies starting in 0Hz to 1Mhz. I am currently using an ...
113 views

### frequency response multistage

hello every one i need ask about frequency response i have an old question of our professor exam in few year, and i try to solve this question many time but i can't so please if any one have idea ...
48 views

### Emulate impedance response using RLC components

I need to emulate measured impedance response of some blackbox using only RLC components. Measurements: ...
37 views

### Frequency response measurement problem with mobile phone: same (wrong?) readings for different speakers

I have built some bespoke speakers and tried to measure their frequency response. My rig is: Source: Android phone Samsung A3 as a source, playing frequency sweep using Android's Frequency Generator ...
87 views

### Why does this ramp generator drop level outwith 60Hz / 10kHz range?

I found the following circuit in an old Elektor article: It is a [edit: ramp generator] that repeatedly (a) charges C3 through R4 to build a ramp, and (b) briefly shorts C3 across T1 to reset the ...
26 views

### Differentiator Op-amp with a triangular wave

Iām trying to create a differentiator op-amp. The input signal is a triangular wave of frequency 100Hz and amplitude 1V. The circuit I have designed features a series resistor (Rin) and capacitor. ...
28 views

### Determining Z1 for voltage divider of RF Matching Circuit

I have a problem where I was given an RF circuit with a series RL load. I am tasked in finding a matching L circuit and determining the values of the components. I used a smith chart to determine that ...
79 views

### 2 Crossovers in parallel: how are frequencies distributed?

So, the other day I connected on parallel a dual-voice subwoofer-system (a Pyle XSUB1-150-4-12d crossover ā like this one ... link might be unavailable after Aug 28, 2019 ... ā and 2 individual ...
172 views

### Simple OP-AMP Frequency Response

In my textbook, there are two interrelated equations. 1. wb = wt / (1 + R2/R1) 2. wb = wt / Ao where ...
125 views

### Frequency response of linear DDS chirp

I am performing a linear frequency sweep from 80 MHz to 120 MHz in 26.84 ms with the AD9910 direct digital synthesiser. I experience that the output amplitude is not constant (see Figure 1). With my ...
3k views

### OrCAD PSPice less than 2 connections error while simulating

I just started using PSPice and I don't know much circuits theory but I need to simulate this circuit and find Vout/Vin: I did this using capture but after running simulation I get this error: ...
347 views

### Increasing frequency response instead of gain for a Cascode circuit

so this a homework problem that I am working on and I'm not looking for a flat out answer, just a good place to start and some help on the concept. So the question is as follows: Suppose our ...
69 views

### Frequency response - all zeros smaller than all poles?

For the following circuit the middle band gain is: $A_v=-g_mR_D\cdot R_{in}/(R_{in}+R_{sig})$, where $R_{in}=47\cdot 10/57=8.25M\Omega$ and $R_D=4.7 || 10k$ The total resistance which the ...
36 views

### Gain error calculation for op-amp circuit in inverting configuration

For an inverting op-amp, calculate minimum gain that is required for the op-amp to achieve a gain error of 1%, if the required closed-loop DC gain is -9. If the input resistance R1 is 1Kohm,find the ...
25 views

### Realisation conditions for impedances

Given a frequency function, which conditions should it fulfill to be realisable and implemented as a one-port impedance? I know that for it to be realisable with passive RLC components, the frequency ...
56 views

### How to separate magnitude and phase response in Proteus?

I have an all-pass filter in Proteus, which in theory doesn't change phase. but changes amplitude. How can I see both of the graphs? Here are the needed scheme and its analogue in Proteus. Although I'...
30 views

### How to Select Prony Method Order?

I'm implementing a Prony decomposition to analyse power system signals in python. I think the code is generally working, but reconstructing a signal from the decomposition shows that it's not "perfect"...
50 views

### Frequency Response of Current Transformer?

I want to get frequency response of an CT in practical applications. Current transformer is nonlinear systems and i want different ways to get it in practice. Which software is better for analyzing ...
89 views

### RFI filter modeling in LTspice w/ triac

I have a few questions about modeling an RFI filter in LTspice with a triac-based dimmer circuit. I'm referencing the circuit described in Figure 11 in Triac Principles and Circuits -- Part 2 (Nuts &...
112 views

### Replacing s with jw in transfer function. When the input function is oscillatory and has exponential decay

I understand a version of this question has been asked numerous times before but I could not find an answer to this specific one. This is how I understood replacing s with jw. From the impulse ...
11 views

### Insertion loss measurements, frequency sweep vs measuring points with a constant driving frequency

I have been modelling a surface acoustic wave delay line, and am trying to clarify what I am seeing in the different models and whether this is applicable to what would occur experimentally. In the ...
38 views

### Designing a network to fit specific amplitude and phase response curves

If we are given a frequency response curve made up of the amplitude (magnitude) and phase (angle) responses, is it possible to design an electronic network with a transfer function identical to the ...
218 views

### Fitting of continuous transfer function

I measure a network's transfer function using a network analyzer and therefore have a set of complex data points, representing the network's gain and phase. I wish to fit a continuous, rational ...
76 views

### Determine capacitor value gives amplifier characteristic independent of frequency

I have an amplifier for the needle EMG electrodes signal like image below. The question is : Determine the C2 capacitor value gives electrodeāamplifier characteristic independent of frequency. Can you ...
43 views

### What's oscillatory instability in the delay differential equations?

Does DDEās stability depend on forcing term and ODEās stability does not depend?If yes, then is frequency analysis of stability applicable only to DDE and not ODE? In control systems, we study ...
60 views

### Can't draw bode curve of this zero

I have a transfer function like this: $H(s)=\frac{s^2+\frac{1}{LC}}{s^2+s\frac{R}{L}+\frac{1}{LC}}$ I can separate the denominator into an expression of the type: $(1+s/a)(1+s/b)$ and then plot ...
72 views

### Determining the phase margin of a negative series-shunt feedback circuit

I have been given a transfer function: $H(s)={A_0\over (1+s/w_{p_1})(1+s/w_{p_2})}$ With the condition that $w_{p_1} << w_{p_2}$ It's designed for this feedback circuit ...
77 views

### Necessary phase shift of op amp

My lecturer said that, for any system where the amplitude response varies with frequency, such as for an op amp, there will necessarily be a frequency-dependent phase shift between the input and ...
63 views

### Would crosstalk be an effect at < 1 kHz signals up to 2.2A?

I'm planning on the use of a current transducer to monitor the current of an induction motor (full load amperage = 2.2A @ 60 Hz). (Link of current transducer, model: LTS 6-NP) If I connect the input ...
105 views

### Miller's theorem and CS cascade

In the above circuit I was asked to find the input capacitance at the gate of Q1, Cg1, using the Miller approximation, to determine the frequency of the pole formed at the amplifier input in terms of ...
233 views

### High freq. response of op amp using Miller

I am trying to find the -3dB freq. denoted $f_H$ in the following circuit, where $R$ has been replaced with a capacitor $C$. I tried doing that in two ways which yielded different results. I'd ...