Questions tagged [identification]
Identify chips, connectors, cables, and other components from markings, photographs, and descriptions of the surrounding circuitry or equipment.
481
questions with no upvoted or accepted answers
6
votes
0
answers
229
views
Identify kind of cable with markings such as "WE-B 2 PAIR" on the jacket
While cleaning out our back yard shed, I came across a coil of cable of a kind that I have never seen before (image below). It was left here by the previous home owner, who worked in some kind of ...
- 161
5
votes
1
answer
159
views
Help identify component HP5300A
The red framed element is on a PCB of a 1973 Hewlett Packard 5300A Measuring System, Digital Multimeter Board.
The double wire seems to have normal resistance.
What is the screw for?
- 587
5
votes
1
answer
366
views
Digital circuit that squares a 4-bit input
Many years ago, I found a digital circuit that squares a 4-bit input in an old textbook (perhaps 1970s or 1980s, possibly older).
(The figure below is not the original figure.
I think the figure below ...
- 393
4
votes
1
answer
110
views
Help Identifying a Molex/MATE-N-LOCK style connector
Hoping someone can help as I've spent the last few hours trying to find this specific connector on a number of distribution and manufacturer sites.
The pitch looks like it is around 6.3mm.
It's a 2x2 ...
- 41
4
votes
0
answers
242
views
Need help to identify an unmarked SOT23-5 IC
I have come across a PCB which is a vibration sensor (switch) based motion detection logic, where on any vibration is detected, the circuit will turn on/off a load. It works in same way as a Push ...
- 91
4
votes
0
answers
546
views
glass diode marking has two bands not mentioned in datasheets
I found a diode in my pack of unsoldered diodes, but can not identify it.
Could you please help to identify the diode? I searched Vishay datasheets and some others and nowhere is mentioned diode with ...
4
votes
0
answers
104
views
Type of component in multimeter
What kind of component is marked SC2? There are no markings on it. How can I know the characteristics about it?
The components are located in the multimeter immediately after the input pins.
- 41
4
votes
0
answers
120
views
Help identifying weird component (sensor)
I have this salvaged part, with an unknown source. I am trying to identify what exactly this could be. Due to the clear casing my guess would be some kind of a light sensor, but googling for those ...
- 199
4
votes
0
answers
195
views
Can anybody identify this IC?
It's part of a power supply for an LED light that's supposed to look like a neon light.
Input: 120VAC, 0.30A
Output: 4.5VDC, 1.5A
The light is broken and is flashing at about a rate of 1Hz and I'm ...
- 127
4
votes
0
answers
4k
views
Identify the manufacturer's logo on the connector used in IKEA OMLOPP LED lights
Can someone identify the logo on this 2-pin connector used in IKEA UTRUSTA/OMLOPP kitchen countertop lights?
The marking on the connector is 58A and some logo, which I can't decipher but it looks ...
- 337
3
votes
0
answers
103
views
Identify this component on wireless receiver
I try to assemble a wireless power receiver by my self from the following diagram:
I'm trying to match with the one I bought, but I'm not able to identify black component indicated on the picture. ...
- 193
3
votes
0
answers
126
views
What's this IC marked "DX 802"?
This is a circuit board for a set of decoration lights that runs on AC.
The tick marks of the same colour indicate which tracks are connected. The three wires soldered on the top of the board are ...
- 259
3
votes
0
answers
86
views
Help with component identification
The component (IC206) is on the mainboard BN94-13095E of a Samsung TV model UN43J5290AG.
- 31
3
votes
0
answers
82
views
Identifying old Thermal Relay and its operating parameters
I was hoping that I could get help identifying an electrical component from a environmental chamber over 30 years old. It is a Sunvic Thermal Relay Type TDW-AJ 2301, 17A 200/250V AC as shown in the ...
- 41
3
votes
0
answers
118
views
Trying to identify PWM IC with marking 1WAU its a SOT23 device
I am trying to identify the device 1WAU which i believe is a PWM buck converter, its driving a BUJ302AD transistor. I have searched on google but no luck in finding this device. If anybody can help in ...
- 61
3
votes
0
answers
159
views
Found a bizarre looking capacitor
I found these capacitors from a broken test equipment in my lab. I guess these are capacitors since the component label starts with 'c'. But I'm not 100% sure what they are exactly. I've also noticed ...
- 607
3
votes
0
answers
99
views
Need help to identify this IC
I am struggling for about three days now to find the part number for U118. Tried every online database, but I still cannot figure it out. Marking is 14YN/H 891 A981.
Any ideas about which manufacturer ...
- 41
3
votes
0
answers
175
views
Is there a name for this vintage 3-pin connector?
I am trying to find a suitable replacement for this connector for a photographic enlarger, and I need a name to search for. Is there a name for this particular pin layout or type of connector?
- 31
3
votes
0
answers
107
views
12 V, 2-pin power socket identification
I’m trying to find a replacement 12 V, 2-pin plug socket for my Campingaz TE 28 LC Cooler. The socket is 22 mm wide x 15 mm deep x 13 mm high.
I can find plenty of power cords but no sockets to plug ...
- 41
3
votes
0
answers
83
views
Looking for part number of a 9-pin connector
Here is the 9 pin connector. For reference: it is used for Li-ion battery packs. In the datasheet it is given as 90SR 9WMN. Searching for the same, I could not find anything similar.
- 31
3
votes
0
answers
118
views
Identify this telephony or data connector?
Recently I had the opportunity to visit a telecom/data room that was being decommissioned. A lot of the remaining equipment seemed to be from around year 2000 or so, as best as I could tell.
While ...
- 1,256
3
votes
1
answer
2k
views
Dumping the content of a Toner Reset Chip using an Arduino UNO through I2C
I am trying to dump the content of this Toner Reset Chip using an Arduino UNO. I read a lot about these chips and the most intriguing with this one is that it only has GND, CLK and DATA pins. There is ...
- 63
3
votes
0
answers
356
views
Need help to identify this diode
Need help identifying this SMD component which is shorted. I suspect it is a Zener diode. I have searched the markings ad nauseam but could not find an answer.
The length is 5mm, so I believe it is a ...
- 31
3
votes
0
answers
177
views
Identifying exact type of transistor
I can not identify the exact model of this transistor.
It reacts as a bipolar NPN Si transistor with EBC pin configuration (first image left to right,) not ECB! This seems to be made by Siemens. ...
- 413
3
votes
0
answers
246
views
Help identifying component in SMPS
I have been working on a Schroff/Cherokee Europe PE1947/23B SMPS (circa 2004?) and have had trouble identifying a component within the circuit.
This SMPS features the following outputs:
+12v DC @ 8A
...
- 218
3
votes
0
answers
132
views
Need help to identify this component from an LED driver module
I got an LED driver module(LDM) from a truck that drives the headlight of the truck.
The PCB has a strange component which I have never seen before. I have added a picture of that component. The ...
- 41
3
votes
0
answers
763
views
Microcontroller identification, 44-pin
I am desperately seeking the real type of this branded 44-pin microcontroller.
Does anybody know this pinout?
I already checked many thousands of 44-pinners on Digikey and Mouser.
A 16MHz crystal is ...
- 31
3
votes
1
answer
209
views
Help identifying this MOSFET
Trying to figure out what this is, and suitable replacements. Markings are "1 Wt 77" Cannot seem to find anything.
Edit: I removed and sized it today, looks like 2.04 mm square package, ...
- 39
2
votes
0
answers
82
views
Identify device marked `NY2`
Can anybody identify the component marked NY2 shown in the picture?
- 309
2
votes
0
answers
82
views
SOT23-6 IC marked 854A
please identify SOT23-6 ICs with markings 179A and 854A. These are mounted on a BLDC ceiling fan controller kit's power supply section. The power supply is 220V AC input and 24V DC output.
Thanks
P.S. ...
- 21
2
votes
0
answers
79
views
What connector is this? (1.2 mm pitch pad array)
I have a mystery board which has 196 pads that are meant to connect to something.
The pads are arranged in four staggered rows of 49 (4 × 49 = 196). The pitch is 1.20 mm exactly. I double-checked, it’...
- 3,511
2
votes
0
answers
84
views
Manufacturer identification by logo: GP
I have some diodes with this logo, and I am trying to identify the manufacturer. I've done quite a bit of searching, and, so far, my best guess was Green Power, but that was a bust. Does anyone ...
- 21
2
votes
1
answer
149
views
Magic "JFN8-1“ IC - IC Identification
I've been searching for weeks now and haven't found an answer.
Goal:
Identification of this IC:
JFN8-1 GA167003
What it does:
If you press the button, it generates a "buzzing" sound to the ...
- 21
2
votes
0
answers
81
views
What type of diodes are used in this setup (igniter from kubota gasoline engine)
The 2 diodes in the picture are over the collector and emitter of a darlington transistor. In an earlier question here i was not able to find what type they were by their print (T3G4E). So maybe this ...
- 21
2
votes
0
answers
166
views
Unusual symbol on schematic
What this is symbol? It's in series with a miniature incandescent lamp and I do not recognize it.
- 21
2
votes
0
answers
221
views
Possible FET with SMD marking 2YJ33
I need to replace a SOT-23 SMD transistor with the marking 2YJ33 (image attached Q1 and Q2). Any idea what it could be?
- 21
2
votes
0
answers
81
views
Delta/Scott-wye/Scott?
I’m a level two electrician so we haven’t been taught about 3 phase even though I work with it all the time and I think I have an ok understanding.
I can’t find any information on this transformer and ...
2
votes
0
answers
79
views
Connector identification for Avermedia C875
I have an AverMedia C875 device, I would like to capture an analog output of my VCR with it. The device has a specific connector for such purposes, but I sadly don't have the dongle that originally ...
- 23
2
votes
1
answer
157
views
Component identification C1CB switching regulator
Is anyone able to identify the 5 pin component that has "C1CB" (I think it's a 1 but it could be I or l) printed on it please? It is on a controller board for a computer monitor. One of them ...
- 21
2
votes
0
answers
286
views
Identification IC: LDO, SOT23-5, Marking HR1zG
I am searching for a few days now for what is presumably a LDO.
The package is SOT23-5, marking HR1zG (or with a bit of fantasy HR1z6)
...
2
votes
0
answers
116
views
Is there a name for this 24-pin vintage Howard Jones connector?
Is there a name for this pin layout or style of 24-pin connector?
This is a Howard Jones-style connector, circa 1950s I believe?
I know similar ones are used for vintage radios, but the layout and how ...
2
votes
0
answers
152
views
What is the name of this huge high-power test equipment?
It seems very old, maybe more than 50 years, and it doesn't have an information plate.
- 745
2
votes
3
answers
213
views
What is the female matching connector to this male circular connector?
I was wondering if anybody knows a part number for the 6-pin female matching connector to the 6-pin male circular connector shown below ?
- 2,656
2
votes
0
answers
269
views
Identifying a chip from its logo and chip markings - no obvious search engine results
I've been unable to identify the MCU on a cheap consumer device board I'm examining, which is quite embarrassing as it's well marked and even has a logo. I can't match the logo to anything from memory,...
- 21
2
votes
0
answers
209
views
Need help identifying SMD, 6 pins, 1.6x1.6mm, top marking 82S
Does anyone know what it might be?
Dimensions 1.6x1.6 mm, 6 pins, top marking 82S.
upd:
This is CarAudio Board Motrex MXTM200.
2
votes
0
answers
132
views
What is this vintage 1979 IC: General Instrument PB8300 in PDIP 14 package?
In one of the drawers of electronic components I've accumulated since middle school (late 1970s), there is one integrated circuit I have so far been unable to identify (yes, only one* thanks to the ...
- 2,181
2
votes
0
answers
72
views
What is this unusual jumper/busbar?
Metal. Length is 5/8", pitch is 0.1". Ruler is centimetres.
This thing is really useful because you can plug it into breadboard and attach a probe clip to the square tab and the connection ...
- 121
2
votes
0
answers
194
views
What is this sheet metal cutout on the PCB?
This PCB is from a car body control module which contains a bunch of relays to control various motors (windows, door locks, etc.). There is no RF devices on this board. This sheet metal cutout looks ...
- 2,756
2
votes
0
answers
54
views
Help identifying right angle (or 180°) USB connector part number
I am searching for the right angle (or is it 180°?) usb connector used in the product on the following webpage - https://thepihut.com/products/solderless-zero-dongle-for-raspberry-pi-zero?variant=...
- 71
2
votes
0
answers
518
views
G1 marking identification SOT 23 3
Wonder if someone can help identify this component.
I am certain it is SOT 23-3 after matching another component next to it. I Could be wrong. I think it may be a shunt regulator or something.
The 3V ...
