All Questions
10 questions
0
votes
0
answers
117
views
STM32 NUCLEO programming problem with STLink V2 Clone
Having a trouble with STLink programmer. Error occours in Keil. When I am trying the download code to flash this error appears. If I am using a USB port for debug there is no error. But I need to ...
- 27
0
votes
1
answer
109
views
STM32H755ZIT6 STLINK Debug
I've just got new NUCLEO STM32H755ZIT6 board with STLinkV3 on it.
I just want to debug simple empty STMCube project and after configuring board According it's
Please look in the UM2408 User manual (...
- 180
0
votes
0
answers
333
views
Custom STM32 board can be programmed via USB DFU, but no connection via ST-Link
I have spent a fair bit of time trying to understand why the stlink does not to see the STM chip when conected over serial wire (port is shown under 'Com ports' in the schematic). I have tried the st-...
- 701
0
votes
0
answers
1k
views
Error in Upgrading ST-link V3 to J-Link
I am getting the following error from the STLinkReglasher program while converting the standalone ST-Link V3 debugger into J-Link.
ERROR: Cannot find an ST-LINK, multiple ST-LINKs plugged in, or ST-...
- 367
0
votes
0
answers
131
views
Is this port a Cortex Debug?
The following is a board with an STM32F103 MCU.
Is it possible to tell if the marked port on the top left (JK1) is a Cortex Debug port that may be connectable with an ST-Link V2 or similar ?
According ...
- 101
2
votes
1
answer
457
views
Can I use the STLink on a Nucleo to program a 5V board
I want to use the STLinkV2 on the nucleo board I have to program an external STM32f4, and I have the SWD pins connected according to section 6.2.4 in the documentation.An earlier unsuccessful attempt ...
- 121
3
votes
2
answers
8k
views
Add serial interface to ST-link clone
I recently started studying STM32 microcontrollers (BluePill STM32F103 dev board + ST-link V2 clone). I was wondering if it is possible to add serial communication to ST-Link clone?
From what I ...
- 255
2
votes
0
answers
2k
views
STM32CubeProg vs STLINK Utility
There are 2 software tools provided by ST to flash their STM32 MCUs namely STM32CubeProg and STLINK Utility
STM32CubeProg Page says:
STM32CubeProgrammer (STM32CubeProg) is an all-in-one multi-OS ...
- 927
2
votes
1
answer
2k
views
STM32F429I Discovery board - unable to do printf() redirection using SWV/ITM
I am an STM32 newcomer. I recently got an STM32F429 Discovery dev board which I have been playing around with. Currently I'm trying to figure out how to use the debugging functions of this M4 Cortex, ...
- 869
1
vote
0
answers
178
views
OpenOCD debugger in Eclipse Neon 4.6.2 Error in final launch sequence
I have been struggling with OpenOCD debugger under Eclipse Neon 4.6.2. Whenever I run the debug configuration I receive below given error message
I have been attempting to debug the STM32F417VGT6 MCU....
- 1,125