Questions tagged [timeout]

A specified period of time, in which an action is expected to occur. If this action has not occurred, a timeout occurs, which normally triggers a function to take further actions (like retrying, ignoring etc.).

Filter by
Sorted by
Tagged with
1 vote
1 answer
54 views

Interfacing with a Tektronix TBS2074B using PyVisa and SCPI commands - Timeout issue

I have a script for capturing waveform data via USB, that at one point in time was working appropriately. However, recently it stopped working and multiple things/settings were changed making it hard ...
Cemetery_Gates's user avatar
1 vote
0 answers
76 views

dsPIC33 Timer sometimes jumps to high values

I have an issue using dsPIC33EV128GM106 32 bits Timer2 in a while() statement with a timeout. Basically what I am trying to do is communicate with a Power Supply through UART2. After sending an order ...
Arthur Chassande's user avatar
0 votes
0 answers
36 views

Upload problem on custom made Arduino Mega2560 rebuild

I designed my own PCB to control a couple of motors, to monitor positions by means of light barriers, as well as via UART with to chat with a barcode scanner and a GSM module. Since I first made a ...
Dominik Billinger's user avatar
0 votes
1 answer
911 views

Ethernet Auto Negotiation Timeout

I am currently trying to get a basic Ethernet communication between a laptop and and FPGA Development board working correctly, however, I seem to be facing an issue where the auto-negotiation is ...
EpicFoodCartDestroyer's user avatar
1 vote
1 answer
1k views

ESP32 stuck in reset

I have a custom board with an ESP32 (Wroom-32U) module and JTAG connection for flashing and debugging. While attempting to flash software, I get a timeout. I measured with oscilloscope and found out ...
F. Heisenberg's user avatar
0 votes
1 answer
490 views

Timeout error in Quad SPI

I am trying to communicate with external flash via quadspi but this time with cubemx and hal libraries. Everything seems to be working fine unless I write something bigger than 0x03 to address ...
harold.potter's user avatar
0 votes
1 answer
234 views

ESP8266 FTDI flash Timeout problem

I'm currently designing an esp8266-based board for a project. It has an LM317 for voltage regulation and the esp8266 is used to drive a RFID card reader (those RC522 reader board from china) and some ...
Matk3z's user avatar
  • 11
0 votes
1 answer
468 views

What is the problem in my timeout implementation?

I'm trying to use a DHT22 (temperature and humidity sensor). Here is its datasheet: DHT22 Datasheet In first few seconds, I can get values. But after a while it gets stuck in here: So I tried to ...
Hernan Crespo's user avatar
1 vote
0 answers
1k views

LoRa RX-Single Mode Inconsistent RX-Timeout Interrupts

I'm trying to implement LoRa communications using an SX1276 module (DRF1276G) and an ATmega328P on a custom PCB. I've got it mostly working but I'm having a strange issue with the timeout interrupt. I'...
Joe's user avatar
  • 151
1 vote
1 answer
475 views

What's the name of a timeout relay which won't re-trigger if it times out?

I would like to replace the relay which triggers a water pump, with a relay which times out after, say, 10 minutes. And if it times out, it stays locked out until reset. Needs to be 230v AC on both ...
digitaltoast's user avatar
0 votes
2 answers
3k views

Is a 'timeout' of 0.2 ms for UART communication realistic?

In most examples (from Arduino/STM32/whatever) I see timeouts of 10 to 100 ms for different kind of communication. However, I am wondering how much 'overhead' there is. Assuming I want to send 8 ...
Michel Keijzers's user avatar