I am trying to connect together 

1. PID Controller ([ALTEC PC410][1], `Output Relay (NO, max. 250VAC, 3A)`)
2. K-type thermocouple
3. SSR ([uxcell SSR-25 DA 25A 3-32V DC / 24-380V AC Solid State Relay + Heat Sink][2])

**Question** Do I connect

1. SSR Input Pins `3` and `4` to the PC410 `OUT1` pins `4` and `5`?
2. 110VAC `L` to PC410 pin `1` and SSR Output pin `1`
3. 110VAC 'N' to PC410 pin `2` and one end of Load
4. SSR Output pin `2` to the other end of Load

**PC410 Pinout**
[![enter image description here][3]][3]

**SSR**

[![enter image description here][4]][4]


  [1]: http://www.ebay.com/itm/121409284851
  [2]: https://www.amazon.com/uxcell-SSR-25-3-32V-24-380V-Solid/dp/B0087ZTN08
  [3]: https://i.sstatic.net/3VCHU.jpg
  [4]: https://i.sstatic.net/bMcAK.jpg