For a while now I'm working on a project where I want to control 48 stepper motors. A pair of two [motors][1] is controlled by an Atmega8. All modules are connected as slaves on an I2C/TWI-bus with an Arduino acting as the master device. A while ago I already posted a [question][2] about power supply issues and got many useful comments regarding ground loops, capacitors and PCB design. The main issue that the Atmega8s are not working properly anymore when I run more than 5 of the motor-control-modules simultaneously. I've tried to implement most of the suggestions, but still have some questions for possible improvements: - Are the large capacitors at the VCC-input as well as next to the motors placed properly? - Is the layout of the "power-plane" designed properly? - Is the decoupling of the analogue ground any good? One module with both steppers running takes up roughly 0.5mA at the same time. My [power supply][3] should be capably of running all modules at the same time. I'm running a star-topography with thick wires between all modules. Okay, so here is what the whole thing looks like (I2C-bus/resistors not displayed to keep it simple): [![system overview][4]][4] The circuit for each of the modules (0X10 etc.) is looking like this. Some notes about the different sections: - The two [motors][1] on the bottom right are connected to the ports PB and PD via [darlington arrays][6] - Connected to PC1/PC2 on the top right are two [optical sensors][5] for homing the stepper motors - PRG on the bottom is the programming port for the Atmega8 [![duostepper_RevC_schematic][7]][7] The PCB design (40 x 60 mm) is currently as such: [![duostepper_RevC_topbottom][8]][8] [![duostepper_RevC_top][9]][9] [![duostepper_RevC_bottom][10]][10] [1]: https://arduino-info.wikispaces.com/SmallSteppers [2]: http://electronics.stackexchange.com/questions/250677 [3]: http://www.meanwell.co.uk/rsp-150-5.html [4]: https://i.sstatic.net/Lk6gZ.png [5]: http://www.vishay.com/optical-sensors/list/product-81147/ [6]: http://www.ti.com/product/ULN2003A [7]: https://i.sstatic.net/pFJlH.png [8]: https://i.sstatic.net/f0uyE.png [9]: https://i.sstatic.net/L2g7w.png [10]: https://i.sstatic.net/SBX8q.png