I might be asking for too much with this one, but I hope it is out there. I would like a fuse that can be reset, but not automatically. I need to be able to know that the fuse is blowing and with a thermal fuse it will just start back up after it opens. I would also like to be able to change the value in case it doesn't open in time or opens too often. I need something low around .25 amps up to 1.5amps, and this is going to happen often so I don't want to use glass fuses because of the cost. Has anyone seen anything like this? Perhaps a circuit? Or has anyone seen some test gear that has these features that I can use on the motor until I find out exactly where it will safely blow. It needs to be small because of where the motor is mounted. Thanks very much, Russ