I have submitted my PCB design to JLCPCB for population. They are asking me if the orientation of my capacitors are correct:

[![enter image description here][1]][1]

My PCB and schematic of it:

[![enter image description here][2]][2]

[![enter image description here][3]][3]

In the [datasheet][4] it states that these are non-polarized according to the schematic:

[![enter image description here][5]][5]

Am I correct? Should I tell them it does not matter which orientation it is in?

The part numbers are as follows:
>22uf 16v Kyocera AVX TAJB226K016RNJ ([datasheet][6], [LCSC][7])
>
>10uf 50v KEMET T491X106M050AT ([datasheet][8], [LCSC][9])


  [1]: https://i.sstatic.net/ovNHw.png
  [2]: https://i.sstatic.net/paB1L.png
  [3]: https://i.sstatic.net/9pTIx.png
  [4]: https://www.mornsun-power.com/html/pdf/K7805JT-500R3.html
  [5]: https://i.sstatic.net/VP6Qo.png
  [6]: https://datasheet.lcsc.com/lcsc/2304140030_Kyocera-AVX-TAJB226K016RNJ_C8020.pdf
  [7]: https://www.lcsc.com/product-detail/Tantalum-Capacitors_Kyocera-AVX-TAJB226K016RNJ_C8020.html
  [8]: https://datasheet.lcsc.com/lcsc/2304140030_KEMET-T491X106M050AT_C1954811.pdf
  [9]: https://www.lcsc.com/product-detail/Tantalum-Capacitors_KEMET-T491X106M050AT_C1954811.html