I have a C-type cable with only three wires. I took apart the cable to get a better look inside and I only have 3 solder points. I'm trying to make an OTG host of the C cable that I have. Where do I attach the 5.1 k resistor if I only have three solder points?

I'm trying to make C-type to micro USB.

[![enter image description here][1]][1]

[![enter image description here][2]][2]


  [1]: https://i.sstatic.net/TcNFc.jpg
  [2]: https://i.sstatic.net/Gmtyf.jpg