Why so many fans of HX711 module, here? You have also the AD7190 24Bit ADC module on Ali. If the weigh scale has three wires, than it can't be full bridge, aka Wheatstone, these have four or six wires. Also, you can't do a Wheatstone temperature compensated bridge from two pairs of these sensors, since one diagonal of the bridge is orientated to measure elongation due to applied force, the other diagonal pair gauges are orientated 90 degrees off, so they measure the elongation due to temperature change. The compensation is achieved because the material elongates isotropic in all directions VS. temperature, so all four gauges sense this, while only two of them sense also the weight.
EDIT:
You chart gives the visual proof of relationship between weight and temperature, however the analytical proof would be a cross correlation between those two values. The other discrepancy could be noise, voltage fluctuation ...etc. Note that cross-correlation is a frequency analysis, no DC drift will be included.