I am trying to amplify a 0.4Vpp audio signal to 1Vpp using
 [OPA344][1] however my output is clipping around 0.5 volts even though my supply is 3.3v

Op-amp is in inverting configuration:
[![enter image description here][2]][2]

blue trace is input, yellow is output.
[![enter image description here][3]][3]


Updated the schematic, this puts me at 1Vpp with a 500mv bias:
[![enter image description here][4]][4]

[![enter image description here][5]][5]


  [1]: http://www.ti.com/lit/ds/symlink/opa344.pdf
  [2]: https://i.sstatic.net/8Bhtz.png
  [3]: https://i.sstatic.net/v0V4j.jpg
  [4]: https://i.sstatic.net/c2E4J.png
  [5]: https://i.sstatic.net/otWUu.jpg