Is there copper on the other side? If so, it's possible that these whiskers indicate that "vias" should be inserted in these holes. 

I'm seeing two nets on the right labelled "A" (no whiskers) and "E" (all whiskers). Given there's an English ham radio callsign lower left, I'm guessing those are "Antenna" and "Earth" (the latter connecting to something on the other side, resembling a ground plane as far as possible on this style of PCB.

There used to be push in / snap off pins for this purpose (made by Harwin) though spare resistor legs, soldered both sides, are a perfectly acceptable substitute.

In fact, searching the callsign (plus BREAN) brings up [the author's website][1] where you can buy kits of slightly more recent manufacture. So why not email the author, and ask him? 

Adding BREAN to the search term yields some hints that  this may have been a DSB transceiver published in Practical Wireless - possibly December 2006 edition.

Re: comment. It's possible some of the supposed "all via" nets are either guard bands, or they might connect different islands of ground plane. Just a hypothesis at the moment.


  [1]: https://www.walfords.net/