Tye 7447 and 7448 are BCD-to-seven-segment display drivers. They are not fully decoded (saving transistors was important in the ~1960s), so invalid inputs provide oddball outputs rather than blanking or showing some semblance of a hex character. Valid BCD inputs are 0x00 .. 0x09, and 0x0A to 0x0F are invalid. From [this](https://www.ti.com/lit/ds/symlink/sn5447a.pdf) datasheet: 

[![enter image description here][1]][1]


If you intend to show the result in hex format you would need to make or find a HEX-to-seven-segment display driver or decoder. If you intend to show the result in decimal digits (from 0 to 225 in this case) you would need to interpose a logic circuit between the multiplier output and  the BCD display drivers to convert 8 bit binary to 3 digit BCD. I suspect the object of your assignment is the latter. 

One such method is the 'add 6' algorithm.  


  [1]: https://i.sstatic.net/m0nVcqDs.png