My friend is trying to print a schematic that was created in Altium. Everything looks OK while viewing in Altium, but when I try to print it to PDF, the pin names and even port names are getting skewed. This is happening even when I use smart PDF to create the PDF. [![view in Altium][1]][1] It seems only things that have been rotated are affected by this. [![skewed image][2]][2] It used to work properly in the beginning, but after a few days it suddenly started to go wrong. [1]: https://i.sstatic.net/CJWgY.jpg [2]: https://i.sstatic.net/Se03o.jpg