I am trying to connect my atmel atmega8 with usbasp (V0.2) to my PC.
I follow [this tutorial][1] to connect my atmega to usbasp.

I have a 6-pins connector:

    o MISO   o VCC
    
    o SCK    o MOSI
    
    o RESET  o GND

Once I connect my usb to my PC, led turns on, and in Control Panel (win7) I see "libusb-win32 devices".
After having compiled main.c with winAVR "make" command, if I try to use "make program" command or I write in cmd this:

    avrdude -p atmega8 -P m8 -c usbasp -U flash:w:main.hex

system tells me:

    avrdude: error: programm enable: target doesn't answer. 1
    avrdude: initialization failed, rc=-1
    Double check connection and try again, or use -F to override this check

How can I solve this problem?


  [1]: http://www.protostack.com/blog/2009/07/atmega8-breadboard-circuit-part-1-of-3-power-supply/