**Calibrate RGB leds with the correct resistor**

Playing around with some microcontrollers and multiplexed leds i noticed that i always need to fix the colors of each led rgb output softwareside... thats a pain...

Microcontroller's pwm output has an output of 255 different values.

By mixing a color with rgb leds you do some math... i like hsl(hsv in mc's) and convert it to rgb values.

So if i want yellow  i need theoretically turn on the red and the green at 100%

rgb(255,255,0);

**nope... it's not yellow...**

1. here the lighness is not considered...the real rgb values should be less than 255 pwm.
 all set to 255 should return white.
2. the blue and the green leds are brighter.

in my code i have something like that

    red*1
    green*0.2
    blue*0.15

i use only 15% of the blue led when mixing the colors.20% of the green one.

The maximum value of pwm used is 38

> 38 of 255 possible values. A waste!


----------
Those are the resistors i need to properly power the leds.

Red: [email protected]  = 150ohm

Green: [email protected] = 100ohm

Blue: [email protected] = 100ohm

**How can i calibrate the leds hardwareside?**

I know i need only 15% of the emitted light comming from the blue led... what resistor should i use?

***Is there some sort of calculation that allows me to set the correct resistor based maybe on the wavelength or other carachteristics contained in  the datasheet?***

Would a Simple LDR help to calibrate those leds?

If i find the correct resistors for a nice hue based on a lightness of 50% what would return rgb(255,255,255) ??? white or not?

What you do to get a nice visual hue on rgb leds?

this for shure would also help to solve some issues on another question i made some time ago 

http://electronics.stackexchange.com/q/173414/76228