I am in need of a reliable gyro/accelerometer combo, that already has built-in motion processing (don't want to deal with Kalman filters in software). It seems that there are breakout boards out there (like IMU Fusion Board – ADXL345 & IMU3000), offering built-in motion processing, but the online comments sections reveal that that is not the case, or that it is rather hard to achieve. The MPU-6050 sounds more reliable, yet there is no official breakout board available yet.

The whole project will consist of ~25 sensors, that will all be connected to a desktop computer. I want to avoid having to do the heavy Kalman filtering for all sensors in software on the computer. Therefore i am looking for a sensor-board that already integrates the filtering.

* DOF: I actually only need 1 DOF as the project has just one rotation point (think of a swing). But all available boards seem to have the maximum DOF. 

* Range: >= 150 degree/second

* Frequency Response:  >= 100 Hz

* Noise: I am really hoping for a quite noise-free signal, to avoid heavy interpolation-filters later on (on the desktop computer)

* A plus would be if i could daisy-chain those boards together. If not i'll have to add another hardware piece that chains them together.

EDIT: 
I found this MPU-6050 breakout board at [drotek.fr](http://www.drotek.fr/shop/en/42-mpu6050-gyro-accelerometer.html), looking for some experience reports now.

Any recommendations or comments would be appreciated!
Thanks!