I am building an RF noise bridge (DC-100MHz (200-400, even better) to replace one that failed in my Palomar Engineers antenna tuner.  I am using SMD components and have completed the implementation of the noise generator.

Now, I am designing the transformer stage between the generator and the Wheatstone bridge. I was planning on using an FT50-43 ferrite toroid, but I was curious whether any SMD RF transformers could be used.  I found that several companies make SMD RF transformers, such as those I've listed below, but I don't know whether they would be good solutions for an RF noise bridge.  There is no transmitting involved, so the requirements are simpler.  

https://www.minicircuits.com/pdfs/TCM1-382WX+.pdf
https://productfinder.pulseelectronics.com/api/open/part-attachments/datasheet/cx2041nlt

I'd appreciate your comments and thank you for your interest and time.

Mike