I have this momentary switch that is used as a Reset switch on my computer :
[![enter image description here][1]][1]

I opened it and I'd like to assemble it back.

It's made with these parts:  

   - the push button  
   - the grey "frame"  
   - a spring  
   - a hard "wire" in J-shape  
   - 2 small "clamp clips" that are, let's say "rectangular"  
   - the black base connected to the cable

The problem is that I can't find any schematic on how this switch is assembled to be able to reassemble it. Can you help me?

*I suppose that the spring goes on the "rounded" splitted plastic pin on the base (even the pin seems to be a bit large for the spring diameter, and the 2 "clamp clips" seems to go on perfectly dimensionned places on each side of the button, sliding straight down on the metal part connected to the wire when the button is pushed (but only one of these "extruded" metal parts is clearly visible).*

[![enter image description here][2]][2]
[![enter image description here][3]][3]
[![enter image description here][5]][5]
[![enter image description here][6]][6]
[![enter image description here][7]][7]
[![enter image description here][8]][8]
[![enter image description here][9]][9]


  [1]: https://i.sstatic.net/5XvuD.jpg
  [2]: https://i.sstatic.net/WK0Bp.jpg
  [3]: https://i.sstatic.net/u8l3W.jpg
  [5]: https://i.sstatic.net/1fRUO.jpg
  [6]: https://i.sstatic.net/taAwA.jpg
  [7]: https://i.sstatic.net/TkYEA.jpg
  [8]: https://i.sstatic.net/jr7r0.jpg
  [9]: https://i.sstatic.net/p5NZx.jpg