Yes I can

- LiPo 11.1V DC (12.6V-9.0V) to
- DC/DC Boost Converter Step-up Voltage Transformer 3-34V to 4-35V 6A Volt Regulator Controller (set to 12V DC output) to
- - Male DC Power Pigtail Plug to Computer (Jetson TK1)
- - Cut off AC adapter from powered USB cable and connect + - of exposed wires.

***Note:** I couldn't get the Kinect to have sufficient power when going through the transformer so I left the computer on the transformer and connected the Kinect straight to the LiPo since [the Kinect supports ~9V-13V DC][1]*


  [1]: http://www.kinecthesia.com/2011/04/kinect-minimum-voltage.html