I am currently working on a project, where I will be doing the monitoring of a  mechatronic system through the following measures:

 - 6 x Motor temperature
 - 6 x Motor Current
 - 6 x Motor Vibration
 - 6 x Spindel Vibration
 - 1 x operating time

And I was wondering if using an Arduino as a parallel real time controller to process and monitor all these measure in real time was a good idea and if it's professional?
By processing I meant detecting spikes within the measured data, saving data to an SD card(still didn't think of it properly), data exchange with another (company's) controller. The measuring frequency would be around 100 Hz.

And if not what would you suggest ?