I'm using a [CD4017][1] to control 8 Mosfets. But my problem is that I only get a output from just 1 pin, this pin is random every time i power up the ic. I wired it up like that [![enter image description here][2]][2]
I shorted reset and output 8 to reset the ic and restart with 0. Is that the mistake or do I have a thinking error?

Schematic with Mosfets[![enter image description here][3]][3]


  [1]: http://www.ti.com/lit/ds/symlink/cd4017b.pdf
  [2]: https://i.sstatic.net/FJB8v.png
  [3]: https://i.sstatic.net/mdMQp.png