Search Results
| Search type | Search syntax |
|---|---|
| Tags | [tag] |
| Exact | "words here" |
| Author |
user:1234 user:me (yours) |
| Score |
score:3 (3+) score:0 (none) |
| Answers |
answers:3 (3+) answers:0 (none) isaccepted:yes hasaccepted:no inquestion:1234 |
| Views | views:250 |
| Code | code:"if (foo != bar)" |
| Sections |
title:apples body:"apples oranges" |
| URL | url:"*.example.com" |
| Saves | in:saves |
| Status |
closed:yes duplicate:no migrated:no wiki:no |
| Types |
is:question is:answer |
| Exclude |
-[tag] -apples |
| For more details on advanced search visit our help page | |
Results tagged with pcb
Search options not deleted
user 6127
PCB is the acronym to Printed Circuit Board. A PCB is a carrier for the circuit's components and their electrical connections.
2
votes
Accepted
assembling PCB, Cx is shown within IC outline - does this mean Cx goes on other side?
IC3 was probably intended to go in an ic socket:
- 4,309
12
votes
Desolder two PCBs soldered together
Chipquik. It's super low temperature solder (melts at 63C). Basically you coat all the pads with it to make a big blob and then you can lift the part off while it's molten.
- 4,309
3
votes
Accepted
Can a via be placed in between the pads of a resistor?
If the boards are machine assembled and do not have plugged vias you must ensure there is some solder mask between pads and vias, otherwise solder paste can wick into the via, making for a poor joint …
- 4,309
0
votes
Connect 2 SMALL Perpendicular PCBs - Need your creativity!
JMC connectors could work. The 20 pin version is 7.9mm wide. Stacked height is 5.6mm.
http://www.jst-mfg.com/product/pdf/eng/eJMC.pdf
- 4,309
4
votes
Using Extra-Wide Traces
If the traces going to a part are very large you may have trouble getting the pad hot enough to melt solder. Consider adding thermal relief
- 4,309