Hot answers tagged

4

The way your diagram is laid out this is exactly the same (electrically) as using drops at each node. Essentially, you need all of the CANL signals to be in parallel and the same for CANH. Since you are running the CAN backbone to each node with what is basically a very short drop you should be fine. A daisy chain configuration would have a CAN input and a ...


1

Everything related to the clock is configured by the software running on the MCU. This includes what is the clock source (internal/external), the clock multiplication with PLL (if it is used or not), enabling and dividing down the clocks for buses and peripherals. There is no way we can know without looking at the source code how your software team has set ...


Only top voted, non community-wiki answers of a minimum length are eligible