New answers tagged display
0
votes
TFT display driving
TFT displays use a backlight, and an LCD panel that blocks some of the light. There are a few tricks that can help (like, a mesh on the display face that absorbs most incident light but has good ...
1
vote
Accepted
Connecting Toradex Verdin iMX8M Mini to LCD Display with RGB 24bit interface with I2C Touch
You need a chip which converts i.MX DSI to 24-bit parallel for your display.
If such chips do not exist you need to go via some other interface with two adapting chips, such as DSI to LVDS and LVDS to ...
9
votes
Accepted
Why does VGA sync have 50 Ω drivers but 75 Ω cables?
To be honest, VGA sync wires are not generally 75 ohms like you expect.
Originally, the VGA did not have 75 ohm coax for sync anyway, so it did not matter. The document you are reading for video ...
1
vote
Why does VGA sync have 50 Ω drivers but 75 Ω cables?
There are no performance issues as stated incorrectly. Therefore there is no real problem or cost reduction or performance improvement to create a change. Proposal: Rejected.
There is no overshoot in ...
4
votes
What is the name of this LCD connector?
My Identiconn utility identifed that as a Molex Panelmate.
Male PCB header: Molex 0532610871
Female plug housing: Molex 0510210800
{Source: DigiKey}
GH1.25 connector
That's a generic part number ...
1
vote
Why isn't there an e-paper tech with different colors in different subpixels?
Wenting Zhang did a kind of overview of this in his talk on speeding up e-ink at Supercon a couple weeks ago.
Even B&W gray scale is not all that great, and when you get color you lose elsewhere:
Top 50 recent answers are included
Related Tags
display × 536lcd × 120
led × 50
microcontroller × 45
tft × 40
arduino × 36
7segmentdisplay × 36
oled × 34
e-ink × 19
lvds × 18
connector × 17
spi × 16
touchscreen × 16
hdmi × 16
identification × 15
digital-logic × 13
integrated-circuit × 13
vga × 13
monitor × 13
raspberry-pi × 12
driver × 12
multiplexer × 12
video × 12
stm32 × 11
rgb × 11