Production Testing is sometimes called in-line testing. That is the PCB or assembly is completed but is only a sub-assembly. There can be many sub-assemblies to get to the final product. In-line testing is used to make sure sub-assemblies are fully functional per engineering standards, then sent to the stock room to be issued for the next assembly level. This procedure assures but does NOT guarantee that the final product will pass final testing.

There is no tag wiki for this tag … yet!

Tag wikis help introduce newcomers to the tag. They contain an overview of the topic defined by the tag, along with guidelines on its usage.

All registered users may propose new tag wikis.

(Note that if you have less than 20000 reputation, your tag wiki will be peer reviewed before it is published.)

history | excerpt history