Questions tagged [sensor]

Sensors convert a physical quantity (e.g. temperature, pressure) into an electrical signal.

Filter by
Sorted by
Tagged with
0
votes
2answers
77 views

Why is this load resistor connected this way and what could be its value?

There is a potentiometer vane and the diagram includes protection components and looks messy, I simplified it by re-drawing as below: The circle R1, R2, R3 and the gap represents the vane's 10k ...
0
votes
2answers
65 views

How to waterproof electronics for an underwater project?

I am building a project that has to do with underwater and I am having trouble waterproofing the electronic and the depth is about 15-20 feet. How will I assure that the electronic will be waterproof ...
2
votes
0answers
25 views

Open source IO-Link

I have been looking at designing a solution around an IO-link master. Does the IO-link Consortium allow for open source implentations of both the master and slave? The documents online seem to give ...
0
votes
3answers
65 views

Can't find socket for the Google Pixel 3 XL Pressure Sensor/Strain Gauge

For the past 4 days, I've been trying to locate this socket, but I'm really struggling. This is now my 3rd attempt at getting help, so I would really appreciate someone more technical, that could help ...
0
votes
2answers
94 views

How to mount TO-92 package on a heatsink?

I want to measure heatsink temperature using LM35 TO-92 package. heatsink is a flat surface of aluminum. What is the proper way of mounting a TO-92 temperature sensor on a heatsink so that can ...
1
vote
0answers
38 views

How do I correctly calculate my magnetometers hard iron bias?

Im using a LSM9DS1 9DOF IMU and I want to calibrate the magnetometer. Im reading the raw data, saving the min/max values for each axis while rotating it for like a minute across each axis. I calculate ...
0
votes
2answers
38 views

Break beam sensor to replace piezo transducer

I have a device intended to sound an alarm and flash a bright light when it detects a phone ringing (so you can hear the phone ringing in noisy environments like workshops). I want to repurpose it to ...
0
votes
1answer
41 views

Read proportional voltage with optoisolator with no ground loops

I have a variable output 0-5V which comes from a sensor and I would like to read it by using the analog input provided by my motor controller. The problem is that I need to avoid ground loops and so I ...
0
votes
1answer
86 views

Why don't commercial metal detectors clearly distinguish between iron and other metals?

I've read about how metal detectors work, and what I learnt here on EE.SE and other articles, the main principle is that ferrous metal will increase the inductance of the search coil, while non ...
0
votes
3answers
73 views

measurement errors: add up or cancel out?

Take an accelerometer, or a hall sensor, or a thermometer, or any sensor. It will have an accuracy, which means the readings will contain some error of this sort. My guess is that by taking a big ...
0
votes
1answer
38 views

Saturation of Constant Temperature Anemometer

Continuation of this question, apologies for the schematic. Rwire and Roh are depicted in balanced state. This is a common Constant Temperature Anemometer circuit, however the diff amp output (...
0
votes
0answers
84 views

Distance monitoring under water

I would like to continuously monitor the position of a metal object that moves vertically up and down in the water, I have to place the sensor under the valve, by 20cm and measure through a small hole....
0
votes
1answer
31 views

Unvalid output voltage of LM35 temperature sensor

I have connected once the Vss and Ground of my LM35 sensor reversely wrong. After correction of this, the output voltage is 0.5 V which seems to be invalid in room temperature. I'm not sure if the ...
0
votes
1answer
42 views

Sensor Error Adjustment

I have been asked to improve the high end accuracy of a pressure sensor (Without modifying hardware). I have collected data from 30 samples and found a trend to the error. My question now is if it is ...
0
votes
0answers
25 views

How does one use Intel's ISH (integrated sensor hub) interface? [migrated]

I am interested in exploiting the integrated sensor hub on my single board computer (an Up Core). However, it is unclear as to what parts I can use and whether the drivers for this hardware already ...
0
votes
1answer
40 views

LVDT Measurement question

Is there any reason one might want to measure both the primary and secondary coils on an LVDT? I assume the primary coil excitation voltage would be constant, but I see circuits around that measure ...
0
votes
0answers
43 views

Why does my MAX30105 give wrong temperature reading?

I am using a custom made board for the MAX30105 sensor. I am checking with ESP8266 Arduino (Sparkfun max301505 library.) When the sensor is on, the temperature reading is 10 Celcius. It ...
0
votes
1answer
36 views

How to get a serial reading from an Ultrasonic Rangefinder on a Raspberry 3 B+?

I'm trying to set up a Maxbotix Ultrasonic Rangefinder (LV-EZ0) with a Raspberry Pi 3 B+. I've tried all the tips I could find: raspi-config disable serial interfacing for shell, but keep it on ...
0
votes
1answer
38 views

Understanding Plot Showing Impedance, Resistance, and Reactance

I am looking at part of the datasheet for a hydrophone I am using in a project. It includes this figure, which plots resistance, impedance, and reactance vs. frequency: Part of my project involves ...
0
votes
2answers
63 views

VL53L1X Time of flight sensor field of view implications

VL53L1X is a Time of Flight sensor, it measures distance via pulsed laser or so I understand. But upon reading its specs it has a field of view of max 27 degrees which is quite confusing for me. I ...
2
votes
2answers
63 views

Use magnetic field to estimate distance - best sensor type

I want to measure the position of something that movies along a single axis over a range of 150mm at a frequency of roughly 1kHz. You can imagine that it is the piston on a shock absorber. I could ...
1
vote
1answer
87 views

Trouble starting a Constant Temperature Anemometer

I made a Constant Temperature Anemometer using this and this as reference. However, I'm having trouble in making it work properly. To get the circuit started I need the emitter voltage (Bridge Top) to ...
0
votes
0answers
41 views

Designing a wireless network of sensors

I'm designing a network of wireless sensors for an outdoor enviroment. It will consist of aprox. 30 sensors powered by battery (6 months autonomy), taking measurements with a low frequncy (max 10 ...
1
vote
1answer
47 views

STM32L0x1 incorrect temperature reading

I'm having trouble reading the temperature, its values are incorrect. The temperature in the room is 22C and the temperature of the sensor shows 55C (selfheating and the measurement error cannot be ...
0
votes
1answer
22 views

Static and dynamic behaviour of a sensor

On a slide, i read that i can model the static behaviour of a sensor as: whereas it's dynamic behaviour as: Is correct to say that the static behaviour is the steady-state behaviour, while the ...
0
votes
1answer
38 views

capacitance vs impedance measurement

I've been trying to design precise distance measurements similar to the digital caliper or dial micrometer for my CNC project by capacitance sensing between prob and base metal. I can connect base ...
0
votes
1answer
42 views

How can I override a capacitive touch on-off switch? [closed]

I bought a floor lamp for use with a mechanical timer that turns electricity on and off using a set schedule (for example, when you're away but want to convince others that you're still at home). ...
15
votes
10answers
3k views

Best practice in transmitting sensor analog signal over longer distances (approx. 100') — in cost sensitive products for microcontrollers

I'm looking for best practices for transmitting an analog sensor signal over long distances to a microcontroller such as the Arduino running at 3.3v or 5v. Keeping costs low is imperative. SPI and ...
0
votes
1answer
38 views

How do I read a simple touch sensor value from Arduino? [closed]

I suppose instead of connecting to the LED it will connect to A3 on the Arduino for example but I'm having a hard time making it work. I don't know which point on the circuit should be connected to ...
-1
votes
1answer
50 views

Ebike brake lever cutoff switch / interrupt switch : How does it work? [closed]

When pressing the brake lever on my ebike the BLDC motor controller (aka ebike controller) 'cuts power' to the motor until the brake lever is released again/sensor is deactivated. I would love to know ...
0
votes
0answers
38 views

Open circuit showing 1-15MΩ of resistance on multimeter

I'm trying to understand a phenomenon I observed while troubleshooting a system. There are airflow sensors with wires connected to common and normally open so that the circuit closes when air is ...
0
votes
1answer
109 views

Why are capacitors used parallel to transistors

In the circuit attached. There are two capacitors. One is parallel to "PWR LED". Although I understand it delays the turning on and off of the LED, why would you need that? Also, the other capacitor ...
0
votes
1answer
30 views

Capacitor on sensor output purpose

I'm currently using a demo-board from sparkfun for quick prototyping of a hall-effect sensor application. The specific chip I'm using is the ACS723-5AB, a Hall-Effect sensor that can measure between -...
0
votes
1answer
46 views

Sharing a single ground wire across multiple RTDs

Consider the following, simplified schematic for a single, two-wire RTD sensor: simulate this circuit – Schematic created using CircuitLab The two wires from the RTD sensor plug into pins 1 ...
0
votes
0answers
59 views

Inductive toroidal conductivity sensor doesn’t work with enclosure on toroidal inductor

I’m building a inductive conductivity sensor using the principle shown in this image. I built a 4khz sine wave generator and connected it with the drive coil and look at the voltage across the pickup ...
1
vote
0answers
38 views

ESP12e: analog reading not working with voltage divider

I'm trying to read from an analog sensor (a capacitive soil moisture sensor). I'm using a ESP12E, not a development board, so the ADC pin can only take 1V max. Since my sensor can output up to 3V, I ...
4
votes
4answers
872 views

A passive sensor does not need any additional energy source?

I am currently studying the textbook Handbook of Modern Sensors - Physics, Designs, and Applications, fifth edition, by Jacob Fraden. In this textbook, the author states the following: All sensors ...
0
votes
0answers
43 views

Ball impact and distance sensor

I am new to electronics, and a professional programmer. I want to develop a sports IoT App and for this app, I need to detect how far a ball hits the ground from the sensor. There can be other ...
0
votes
1answer
35 views

Recommendation on Optical Sensor (being used for Fingerprint Scanning)

When I have researched available optical fingerprint sensor modules, every one comes with a processor that takes the sensor image data and processes it. They all appear to keep the fingerprint data ...
0
votes
1answer
40 views

hall current sensor potential failure mode

I was curious what are potential common failure modes for hall-based ac current sensors in a mains ac environment? Specifically those like the acs712 and acs723. Assume you have a 5amp current sensor, ...
0
votes
1answer
58 views

infrared and K-Type temperature sensors badly disagree [closed]

They are both cheap. There is a piece of PCB balanced on top of the K-type thermocouple's probe; there is also a red laser light from the infrared thermometer right in the middle of the same PCB where ...
0
votes
1answer
35 views

Possible to measure EEG signals with an AM receiver antenna/circuit?

I'm having trouble understanding the importance of placing EEG electrodes directly on the skin. I used to think the reason for this was to pick up voltage differences between points on the skull, the ...
0
votes
1answer
29 views

Force-Sensitive Resistor Break When Pressure is Constantly Applied

My question is mainly the following: Is there a force-sensitive resistor that can handle pressure (like 50kg weight) constantly on it? While not having its response curve altered because of this? ...
-3
votes
1answer
87 views

Running out of I2C channels on microcontroller [closed]

I am building a signal acquisition system that has a lot of sensor. These sensors communicate with the microcontroller by I2C interface. I'm running out of I2C channels on the microcontroller. Is ...
0
votes
0answers
40 views

STM32duino can't detect MPU6050

I'm currently trying to read values from an MPU6050 using an STM32duino, but using an I2C scanner code, the STM32 can't detect the sensor. I've checked all the connections using an avometer and it all ...
2
votes
2answers
86 views

Humidity sensor connection “HIH-4000”

Why do we need a load resistor connected between the output pin and ground? reference to a detailed description of the sensor
0
votes
2answers
88 views

How to mux 10 sensor units with 4-pin that must communicate with a single unit with 3 programmable input

I have 10 sensor units, each unit has 4 pin Vcc, Gnd, Digital out and ...
1
vote
1answer
61 views

Designing a CANbus+DC power network of sensors

I'm designing a network of sensors to be placed in an outdoor environment, see the attached diagram. The network will consist of 30 data acquisition boards (very low power consumption), divided in 10 ...
0
votes
2answers
73 views

Why does the MAX30102 only work on a finger?

I am using a MAX30102 sensor with Sparkfun library for heart rate monitoring. It does work for a finger, but when the sensor is mounted on chest I am not getting a reading. Why is that?
0
votes
0answers
56 views

Noise level detector circuit design (AC to DC to PWM)

So I'm building a sound level detector. Design requirements are: Only basic circuit elements No IC's, except for op-amps Sound level will be displayed with a blinking LED Blinking LED will be ...

1 2 3 4 5 46