New answers tagged texas-instruments
0
votes
Why are MOVs rated for mains voltages chosen for earth-to-signal protection in PoE PSE applications, as recommended in TI's SLUA818?
The operative phrase in §6.1.2.1 Requirements is, "Surge suppressors that bridge the insulation shall have a minimum rated operating voltage Uop... of Uop = Upeak + ΔUsp + ΔUsa."
That means, ...
- 4,967
2
votes
Why am I getting a low output voltage (5.98V instead of 12V) from a LM2623 stepup converter?
The datasheet has this warning (emphasis added):
8.2.2.2 Choosing The Correct C3 Capacitor
The C3 capacitor allows for the duty cycle of the internal oscillator to be > programmable. Choosing
the ...
0
votes
Why am I getting a low output voltage (5.98V instead of 12V) from a LM2623 stepup converter?
When laying out the PCB for a DC DC converter, parasitics introduced by the PCB traces can be a problem because it changes the design. Therefore reducing parasitics from the traces and vias will help ...
- 87.1k
Top 50 recent answers are included