slightlynybbled's user avatar
slightlynybbled's user avatar
slightlynybbled's user avatar
slightlynybbled
  • Member for 8 years
  • Last seen more than a month ago
29 votes
Accepted

Why do two reverse diodes represent the logic gate AND?

5 votes

Delay time for traffic light

5 votes
Accepted

DC Fan using less than half of rated current. Looking to overvolt

4 votes
Accepted

A question about using PID to improve transient response for a DC motor

4 votes

Can't seem to write to spi flash

4 votes

One MOSFET appears to get hotter than the other

4 votes
Accepted

Measuring Battery Voltage from Microcontroller using ADC

4 votes
Accepted

How do transistors have three legs when there are two circuits going through?

4 votes
Accepted

Are these BLDC waveforms making any sense?

3 votes
Accepted

Using a published Watt-hour power curve for AA batteries, I get a theoretical battery life that's way lower than in practice

3 votes

Digital current affects analog signals, but why not the other way around?

3 votes
Accepted

STM32 - ESC : Problem with my BEMF

3 votes
Accepted

How Do I Limit My Motor Current While Maintaining Voltage Drop Across It?

3 votes

Relationship between Vds and Vgs- MOSFET

3 votes

Is the efficiency of (Qi) wireless charging affected by a metal surface?

2 votes

Zero-Cross detector problem

2 votes
Accepted

Is it possible to load values to a counter upon startup?

2 votes

MOSFET Motor Switch

2 votes

Get Li-Ion battery capacity from discharge time (constant load)

2 votes

Analogue Hall sensored brushless outrunner motor position control

2 votes
Accepted

Measuring the frequency of motor vibration

2 votes

voltage divider -- for detecting higher voltage in ADC

2 votes

LT3663 regulating low

2 votes

Serial pins, and PC USB port damaged using a USB to Serial converter (PL2303HX)

2 votes

bridge rectifier made with 1N5408

2 votes

Brownout Mitigation

2 votes

why are pm (permanent magnet) machines synchronous? and how do I start them?

1 vote

What is the function of the diode in the image?

1 vote

Will this hbridge work?

1 vote

Methods for converting PWM to +/- 10v Signal