Skip to main content
Electrical Engineering
Master's user avatar
Master's user avatar
Master's user avatar
Master
  • Member for 8 years, 5 months
  • Last seen more than 7 years ago
Profile Activity

61 Answers

Score Activity Newest
21 votes
Accepted

How to chose the right decoupling/bypass capacitor variant for opAmp power rails?

4 votes
Accepted

High speed signal return path in a stack-up with multiple ground planes

4 votes

How can I improve this Ethernet differential pair?

3 votes

Switching +12VDC by arduino

3 votes
Accepted

Options for matching 75 to 50Ohms on PCB

3 votes
Accepted

Detect when a device has been connected to Vcc

3 votes

using a magnet to trigger a traffic light

3 votes
Accepted

Principles for premature failure analysis of PCB tracks and vias

3 votes
Accepted

Is it possible to calculate junction temperature from case temperature without knowing the power dissipation?

2 votes
Accepted

Multiple voltage measurement

2 votes
Accepted

How to make a -10 V DC power supply?

2 votes
Accepted

Buck converter after 50Hz transformer

2 votes

choosing a voltage regulator chip

2 votes
Accepted

How to remove noise from power adapter

2 votes

Set ADC input to high impedance

2 votes
Accepted

MOSFET-N as a switch for several ICs

2 votes

Is this clamping voltage divider for a high-impedance input a good, robust design?

2 votes

Maximum Allowed inrush current in Eurpoe

2 votes

Refitting a 6 volt shunt regulated system to a buck regulated system

1 vote

quadrature detection for MRI

1 vote
Accepted

Questions about a relay controlled AC fan setup

1 vote

LC Oscillator Gain Compression

1 vote

Voltage spikes with ZVS full bridge

1 vote

Impedance matching for piezo element

1 vote
Accepted

How to fix a frequency shifted audio part of an RF signal?

1 vote

Effect of power supply ripple on ADC readings?

1 vote

PCM4202 Input buffer

1 vote

High peak current supply circuit

1 vote

Is this clamping voltage divider for a high-impedance input a good, robust design?

1 vote

Does the rating of an AC fuse point to the amplitude or rms value of the current?

1
2 3