Skip to main content
stiebrs's user avatar
stiebrs's user avatar
stiebrs's user avatar
stiebrs
  • Member for 11 years, 4 months
  • Last seen this week
9 votes

JTAG vs SWD debugging

5 votes
Accepted

Why does a Peltier cooler heat up when cooled by ice?

4 votes

How to demonstrate the effect of baudrate in serial communication

4 votes
Accepted

Wiring and soldering a prototype board

3 votes
Accepted

Can I use mbed for STM32F103(C8T6)?

2 votes

How do I prevent bridges while soldering SMD Components?

2 votes
Accepted

Transient drop in accelerometer gravity reading when in motion

2 votes

Can I get away with that poorly designed board?

2 votes

PSU drops both current and voltage when connecting to an LED

2 votes

How to make arduino with OV2640 2MP Camera Module

2 votes

SPI vs Parallel interface for ADCs?

2 votes

Is it normal to be able to hear a high pitch buzz from devices that are charging?

1 vote

STM32 trying to communicate with two I2C, but the second one fails

1 vote

STM32F303 ADC+DMA Averaging of measurements

1 vote
Accepted

Considerations for connecting 5 pin wire cables and interfaces to USB?

1 vote

Slide lock or flip lock for FPC connector?

1 vote

Bleed resistor with a load that can be turned off

1 vote

LC filter for TEC (Peltier)

1 vote

FreeRTOS and 3 UARTS

1 vote
Accepted

"ground disturbance" in current sensing with shunt resistor

1 vote

STM32F722ZE SPI communication with LSM6DS33 using HAL

1 vote

spi fan out - sn74AHC244 - not working

1 vote

Is there such a thing as ground "quality"?

0 votes

Use HM-10 (Bluetooth LE) or ESP8266 for telemetry

0 votes
Accepted

STM32429ZI Dısc1 Gyro wrong data problem

0 votes
Accepted

STM32L0/FTDI UART Transmit doesn't work

0 votes

How to control two separate circuits with one switch?

0 votes

STM32F3 I2C hangs on busy flag (interrupts)

0 votes

STM32 RTC with HAL libraries

0 votes
Accepted

Stm32f103 blue pill and stlink power