Skip to main content
Electrical Engineering
Anas Malas's user avatar
Anas Malas's user avatar
Anas Malas's user avatar
Anas Malas
  • Member for 4 years, 9 months
  • Last seen more than a week ago
Profile Activity

25 Answers

Score Activity Newest
5 votes

What problem is solved by using a PMOS for reverse polarity protection instead of an NMOS?

4 votes

Power drain meaning

4 votes

P-channel logic-level MOSFET that turns on properly when driven by an ESP32 (working from 3.0 V to 3.6 V)

4 votes

Multi-layer PCB design

4 votes

The best stack-up possible with a four-layer PCB?

4 votes

What is the best method to measure unknown resistances after a multiplexer?

4 votes

Identify the connectors on those sensors

3 votes

What's the purpose of using 2 Schottky diodes connected in such way?

2 votes

Does the temperature affect the working of a PCB circuit?

2 votes

Does this LED require a series resistor?

2 votes

Confusion regarding future scope of electrical & electronics engineering jobs (generally world wide and especially in India)

2 votes
Accepted

Use phone wireless charging reverse as power source

1 vote

Are terminations necessary for unused SuperSpeed signals in a USB-C 2.0 device port?

1 vote
Accepted

How to find and enable fault input pins on AVR Timer/Counter-D (TCD)?

1 vote

Is this a logic-level MOSFET?

1 vote

A proper way to stop power banks from turning off, and how to power low-current devices through USB

1 vote

Alternative wireless technology for passive RFID tags

1 vote

Pressure activated switch for a light up LED straw? Similar to how a vape pen activates with air pressure drop when sucking?

0 votes

N-MOSFET Gate to Drain short circuit configuration and Vgs

0 votes

Why don't WD NVMe SSDs have PCIe AC coupling capacitors?

0 votes
Accepted

Would an MPPT module that charges Li-po batteries work with a NiMH battery?

0 votes
Accepted

Connecting load sensors to a custom PCB

0 votes
Accepted

Identifying push button from a Bosch refrigerator

0 votes

How to draw power from one of two sources according to priority, with indication for used source?

-1 votes

Is it possible to get a tactile switch with more than two rails?