I just happened to replace the inductor with a similar type, nothing has changed though

I have read fcc.report/FCC-ID/2AJYU-8PYA007/4857209.pdf

if not how can I get it accomplished?

@winny should I replace the inductor if that's the problem right?

@Kubahasn'tforgottenMonica are you here?

If you have a experience about it and knowledge to apply linear equation, of course

I will upload soon

Would you mind if you help me with calibration based on a linear equation?

AGND - GND GND - ARDUINO MEGA are connected It worked when I did not use the board regulator and connected directly to the Arduino mega 5V, GND. What I am wondering is, what are the consequences of connecting in that way?

What are the consequences of connecting directly to the Arduino mega 5v, but not using built-in regulator on hx711

It is kinda working though Connected 4load cells in parallel And ALL GNDs connected correctly as you mentioned before, i got values from the ADC @devnull

Do you know an amplifier that fills the requirement for my system? if we are out of option

@Kubahasn'tforgottenMonica Please provide your experienced knowledge, I am out of option

Let us continue this discussion in chat.