user avatar
user avatar
user avatar
user2943160
  • Member for 8 years, 6 months
  • Last seen more than a month ago
23 votes

How does a chip antenna work?

17 votes
Accepted

Packaging polarity indication of a supercapacitor (polarity indicated by arrows)

13 votes

Performing FFT at low frequencies but high resolution?

10 votes

How many MOSFETs can we safely parallel in condition of very high currents? I had problems with a motor application at 48V 1600A

9 votes

Why would metal from a pad be *underneath* the solder mask in a footprint specification?

5 votes
Accepted

How to measure current with a multimeter? Currently getting inconsistent measurements

5 votes

Is length matching is necessary on I2C, UART signals, and SPI?

5 votes
Accepted

Differences between Solid Region vs Polygon Pour

5 votes
Accepted

Actual speed of clocks in FPGA?

4 votes
Accepted

Placing UFL connector in 3G dongle

4 votes
Accepted

How does Hybrid Ground Works?

4 votes

Replacing aluminum capacitor by tantalum capacitor for accelerometer bulk bypass

4 votes
Accepted

Will this MOSFET switch circuit work?

3 votes
Accepted

Pull-up vs Pull-down on enable pin

3 votes

Improve Rise Time on 1Hz Signal

3 votes
Accepted

What is the plug model to match a bm04b gh connector

3 votes

Why are the junctions where ADC pins connect to PCB board ignored in thermocouple cold jucntion conmpensation calcutaions?

3 votes

RGMII and RMII backwards compatibility

3 votes

Can I cut up a proprietary barrel connector cord and make a USB power cord with it?

2 votes

How to convert 700V AC to 5V DC 500mA?

2 votes
Accepted

How to connect flyback diodes on a h-bridge

2 votes
Accepted

VHDL Compile Error saying "Type of VARIABLE is incompatible with

2 votes
Accepted

Isolated DC DC converter operating principle

2 votes

Does a switching supply always need load

2 votes

Possibility of poles with positive real part in RLC filter

2 votes

Eagle CAD Multiple individual parts in one device

2 votes
Accepted

Component with multiple VCC and GND pins. Should I connect all of them?

2 votes

Two identical DC power supplies in parallel for redundancy?

2 votes

Two bulbs of different wattage in one AC circuit

2 votes

I always thought that bodies of water were ground