User KarlKarlsom

23 votes

What will happen if the output from a NOT-gate injected- BACK to its OWN input?

answered Jul 2, 2016 at 5:58

5 votes

Accepted

Why stepping up voltage during transmission considers \$I^2 R\$ but not \$\frac{V^2}{R}\$?

answered Jun 9, 2016 at 0:14

4 votes

Building an appliance with two plugs to get double the voltage?

answered Jun 12, 2016 at 12:34

3 votes

Accepted

I fried my multimeter while connecting it to AC

answered Jun 18, 2016 at 14:31

3 votes

Accepted

What are all the reasons that transformers are considered safer?

answered Jun 25, 2016 at 0:24

3 votes

Accepted

Step up 3.3V to 5V and draw 500mA without a voltage collapse/break down

answered Jan 5, 2021 at 4:04

3 votes

P-channel MOSFET inrush current limiting

answered Apr 2, 2021 at 6:06

2 votes

Dual rail reverse voltage protection

answered Aug 5, 2016 at 22:04

2 votes

Trace width and clearance calculations

answered Jan 17, 2017 at 20:02

2 votes

Why my boost converter is not boosting the voltage?

answered Apr 4, 2017 at 4:25

2 votes

Does several PIC12F683 pull-ups cause short circuit

answered Jun 19, 2016 at 3:12

2 votes

An SPDT switch using TRIACs

answered Jun 20, 2016 at 12:18

2 votes

Accepted

Weird value of track width with calculator

answered Jun 9, 2016 at 8:12

1 vote

Accepted

OpAmp circuit with diodes: conduction conditions

answered Jun 11, 2016 at 1:55

1 vote

How to remove DC offset of the input signal without using an opAmp?

answered Jun 15, 2016 at 12:41

1 vote

Accepted

High side switching

answered Jun 16, 2016 at 15:35

1 vote

Accepted

RC circuit How does the current vary after the switch is closed?

answered Jul 2, 2016 at 1:23

1 vote

Timer Interrupt not working as expected on ATMEGA808/1608

answered Jul 16, 2022 at 12:55

1 vote

Accepted

MCP2515 CAN Transceivers can't go higher than 125kbps

answered Dec 24, 2020 at 15:45

1 vote

How to edit the shape of pads for a component footprint in Fusion 360?

answered Jan 14, 2021 at 23:47

1 vote

Accepted

Is it possible to mount a 7-Segment on an FPC and what points need to be considered?

answered Jan 27, 2021 at 14:59

1 vote

Discharging 100 A battery

answered Jul 3, 2016 at 8:41

0 votes

Atmel Xmega ADC input voltage range - Can the ADC be damaged by exceeding it's reference voltage, if the input is still less then VCC?

answered Aug 24, 2015 at 14:22

0 votes

How does the ELPF and XTAL inputs on the ADV7180 recommended circuit work?

answered Jun 25, 2016 at 16:05

0 votes

ATSAMC21 - CAN configuration - Nominal bit timing vs. data bit timing & time quanta calculation

answered Feb 2, 2020 at 6:30

0 votes

Accepted

MCP4011 - Exposed pad - connect to GND?

answered Feb 2, 2020 at 15:03

0 votes

Accepted

Eagle 9.5.x - custom flip-able layers

answered Apr 8, 2020 at 14:35

0 votes

Accepted

ATSAM / ASF4 - how to use HRI driver

answered Jun 26, 2020 at 4:52

0 votes

What's the differences of these usage of PNP, NPN transistors?

answered Jun 18, 2016 at 15:31

Stack Exchange Network

29 Answers

What will happen if the output from a NOT-gate injected- BACK to its OWN input?

Why stepping up voltage during transmission considers \$I^2 R\$ but not \$\frac{V^2}{R}\$?

Building an appliance with two plugs to get double the voltage?

I fried my multimeter while connecting it to AC

What are all the reasons that transformers are considered safer?

Step up 3.3V to 5V and draw 500mA without a voltage collapse/break down

P-channel MOSFET inrush current limiting

Dual rail reverse voltage protection

Trace width and clearance calculations

Why my boost converter is not boosting the voltage?

Does several PIC12F683 pull-ups cause short circuit

An SPDT switch using TRIACs

Weird value of track width with calculator

OpAmp circuit with diodes: conduction conditions

How to remove DC offset of the input signal without using an opAmp?

High side switching

RC circuit How does the current vary after the switch is closed?

Timer Interrupt not working as expected on ATMEGA808/1608

MCP2515 CAN Transceivers can't go higher than 125kbps

How to edit the shape of pads for a component footprint in Fusion 360?

Is it possible to mount a 7-Segment on an FPC and what points need to be considered?

Discharging 100 A battery

Atmel Xmega ADC input voltage range - Can the ADC be damaged by exceeding it's reference voltage, if the input is still less then VCC?

How does the ELPF and XTAL inputs on the ADV7180 recommended circuit work?

ATSAMC21 - CAN configuration - Nominal bit timing vs. data bit timing & time quanta calculation

MCP4011 - Exposed pad - connect to GND?

Eagle 9.5.x - custom flip-able layers

ATSAM / ASF4 - how to use HRI driver

What's the differences of these usage of PNP, NPN transistors?