2014
Oct
28
awarded  Scholar
Oct
28
accepted Issue getting relay to trigger, coil voltage might be insufficient
Oct
3
comment Issue getting relay to trigger, coil voltage might be insufficient
Thank you, I will go ahead and order the parts. This is the first time ive messed with MOSFETS, is this the correct way that it will be connected imgur.com/pEqCGRR Imgur
Oct
3
comment Issue getting relay to trigger, coil voltage might be insufficient
This one has a cont drain rating of 1.5A, is it okay?digikey.com/product-detail/en/BSS214N%20H6327/…
Oct
2
comment Issue getting relay to trigger, coil voltage might be insufficient
Thank you for the fast reply earlier Dan, that makes sense to me that the purpose of those terminals on the backside of the PCB for testing purposes. I am a little confused on the diagram though. From your diagram, will I only be using T6(-) and not t9(+) ? Or did you write "6v" instead of t9 by accident? I will be feeding the relay 6v, because that is whats available from the Alarm's 4x AA's.(~5.85v)and per the relays datasheet It says at 6v it needs 60mA to close. If you could point me to a part number of the MOSFET i need I would be very grateful! Thank you.
Oct
1
awarded  Student
Oct
1
asked Issue getting relay to trigger, coil voltage might be insufficient