Skip to main content
HighInBC's user avatar
HighInBC's user avatar
HighInBC's user avatar
HighInBC
  • Member for 8 years, 8 months
  • Last seen more than a month ago
5 votes

Conductive Adhesives?

4 votes
Accepted

If serial ports are asynchronous, why do they have an SCL line?

4 votes

Replace tiny resistor with a physically larger one?

4 votes
Accepted

Led strip dimming

4 votes
Accepted

How to capture, save, and rebroadcast an infrared signal?

3 votes

Ways to connect 14 AWG to small PCB solder tabs

2 votes
Accepted

Can I charge a my Li-Ion batteries using a regular power adaptor?

2 votes

best way to regulate 3v3 from 25.2V (DC)

2 votes

Making conductive traces for capacitive touchscreens

2 votes

Implementing a class-compliant USB MIDI device

2 votes

Detect the colour of an LED (Red Blue or Green)

2 votes

Are there data connectors designed to fit through small round holes?

1 vote

Strain Relief for Small Wire Connectors

1 vote
Accepted

Why are components hard to insert into a breadboard?

1 vote

Automation: How can I dispense thousands of paper sheets?

1 vote

Powering ESP8266 from pc atx power supply

1 vote

ESP8266 Power Supply source Recommendation

1 vote

Will 5V from USB to i/o pins kill my arduino, or my laptop?

1 vote

Why do LCDs use flex connectors and can I replace them with normal wires?

1 vote

12V power supply for Raspberry Pi

0 votes

How to measure current on an electrolytic etcher

0 votes

Fetching current time from unconnected wifi networks?

0 votes

recharge AGM batery with 3 phase charger and 277 volt power

0 votes
Accepted

Coin cell battery to 3.3V?

0 votes

Circuit to indicate 1 to 10 based on pressed switch

0 votes
Accepted

Can I use ATX as a cell phone charge station?

0 votes

VIA connection pins

0 votes

Atmega328 Clock Freq. via Divider vs. Power

0 votes

Can I use 9V battery to power up a cooler fan?