0
\$\begingroup\$

Im facing some issues to figure out sequence of my bipolar(specifically) and unipolar stepper motor. However , I've managed to get Dual H Bridge but couldn't find out the example/documentation for the one i got.

I want to drive my bipolar stepper motor via dual h bridge using parallel port and unipolar via IC UN2003.

You're expert guidennce for pulse sequence and wiring identification will be truly appriciable. Thanks!!

Pictures

DUAL H BRIDGE : https://i.sstatic.net/eLruy.jpg

Stepper Motors scavenged from printers : https://i.sstatic.net/SN15A.jpg

\$\endgroup\$

1 Answer 1

Reset to default
0
\$\begingroup\$

Please do improve the answer if you can as i really dont know much electronics .

However, I'm able to understand and get very good explanations and documentation from of-course THE WEB.

STEPPER MOTOR WIRING AND SEQUENCE
WIRE TRACING WITH MULTIMETER
This tutorial helped to trace coil/wiring using multimeter (that stupid to not even determine coil)
http:// 42bots .com /tutorials/stepper-motor-wiring-how-to/ (remove space)

STEPPING SEQUENCE
This very good demonstration helped alot to figuring out pulse sequence.
http:// www. youtube .com/watch?v=kAyDmovM18E (remove space)

DUAL H BRIDGE
helpful documentation
https:// www. bananarobotics .com/shop/How-to-use-the-L298N-Dual-H-Bridge-Motor-Driver (remove space)

PARALLEL PORT
Once i understand the above mentioned and able to create logic i use I/O in c/c++ outb(); to interface stepper motor.

I need to study more to get control of speed and torque

\$\endgroup\$
4
  • \$\begingroup\$ It's good you got it sorted out but answers are supposed to be useful for others in the future. Maybe you could add some more details or a schematic of your working solution? \$\endgroup\$
    – PeterJ
    Commented Dec 24, 2014 at 10:21
  • \$\begingroup\$ I will for sure later when i get free from work. Ive gone through alot to get simple answer \$\endgroup\$
    – user3154926
    Commented Dec 24, 2014 at 10:25
  • \$\begingroup\$ Tell us what you've read, and what experiments proved to be insightful. \$\endgroup\$
    – Nick Alexeev
    Commented Dec 24, 2014 at 18:33
  • \$\begingroup\$ Hope i tried as you might expected..thanks anyway. \$\endgroup\$
    – user3154926
    Commented Dec 24, 2014 at 19:53

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.