I am trying to model a transformer of 1:100 ration in Ltspice, here is the picture of it
![enter image description here][1]
The above circuit is stepping up the input voltage by 100 times but I see something strange which is when I am providing SINE 1V input with series resistance of 0.1ohm and freq of 1MEG then I am observing the following 1mV at input
![enter image description here][2]
and output voltage as 100mV which makes sense when the input voltage is 1mV
![enter image description here][3]
My question is why is the input voltage 1mV when I am providing 1V at the input? Can anyone please answer this question. [1]: https://i.sstatic.net/wL4RH.png [2]: https://i.sstatic.net/2nvo3.png [3]: https://i.sstatic.net/CKOqL.png