Timeline for What transistor to use in place of QVE11223 opto
Current License: CC BY-SA 3.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| May 20, 2014 at 16:18 | comment | added | Cornelius | @PaulG 3 is the ground. There is a diode and a resistor across 6 and 3. | |
| May 20, 2014 at 16:05 | comment | added | Peter Bennett | As I see it, R1 and the connection to the power driver board are not needed. The Arduino ground must be connected to the Fliptronic board ground. | |
| May 20, 2014 at 14:37 | comment | added | PaulG | If I'm understanding correctly, you're suggesting I still need the 12v from the power driver board, even though it just comes in through 6, then out through 3 again? Apologies if this is a dumb question. | |
| May 20, 2014 at 14:31 | history | edited | Cornelius | CC BY-SA 3.0 |
edited body
|
| May 20, 2014 at 14:24 | history | answered | Cornelius | CC BY-SA 3.0 |