Timeline for I2C Enabled LCD Unreliability
Current License: CC BY-SA 3.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| May 29, 2014 at 21:37 | comment | added | spizzak | I've tried using stronger pull-ups and changing the I2C timing. I'm now running at 10kHz and I'm still seeing the display NACK- I attached a screen capture above. | |
| May 29, 2014 at 17:53 | comment | added | Scott Seidman | There's a I2C config tool described at stmcu.org/download/index.php?act=down&id=5779. You might give that a peek. | |
| May 29, 2014 at 17:36 | comment | added | spizzak | I believe this is covered in 'I2C_InitStructure.I2C_Timing = I2C_TIMING;' I used the STM timing calculator where the I2C speed (100kHz) was one of the parameters. | |
| May 29, 2014 at 17:23 | history | answered | Scott Seidman | CC BY-SA 3.0 |