Skip to main content
Electrical Engineering

Return to Answer

Grammer correction as per David comment
Source Link
Power_Electronics
Power_Electronics
  • 123
  • 1
  • 9

This is a high frequency transformer. two terminal is primaryTwo terminals are, Primary and outerother side (6 terminals) is multi output secondary and possibly a reset winding. since Since you took it out from SMPS, itIt could be flybackFlyback or forward transformer.

noteNote: youYou might not be able to use it as conventional transformer. itIt could be dangerous too (saturationSaturation, heatHeat)

otherOther stuff at its top could be low quality shield .

Source: iI am power electronics engineer with 6 year experience and iI have designed several transformers.

This is a high frequency transformer. two terminal is primary and outer side (6 terminals) is multi output secondary and possibly a reset winding. since you took it out from SMPS, it could be flyback or forward transformer.

note: you might not be able to use it as conventional transformer. it could be dangerous too (saturation, heat)

other stuff at its top could be low quality shield .

Source: i am power electronics engineer with 6 year experience and i have designed several transformers.

This is a high frequency transformer. Two terminals are, Primary and other side (6 terminals) is multi output secondary and possibly a reset winding. Since you took it out from SMPS, It could be Flyback or forward transformer.

Note: You might not be able to use it as conventional transformer. It could be dangerous too (Saturation, Heat)

Other stuff at its top could be low quality shield .

Source: I am power electronics engineer with 6 year experience and I have designed several transformers.

Source Link
Power_Electronics
Power_Electronics
  • 123
  • 1
  • 9

This is a high frequency transformer. two terminal is primary and outer side (6 terminals) is multi output secondary and possibly a reset winding. since you took it out from SMPS, it could be flyback or forward transformer.

note: you might not be able to use it as conventional transformer. it could be dangerous too (saturation, heat)

other stuff at its top could be low quality shield .

Source: i am power electronics engineer with 6 year experience and i have designed several transformers.