Skip to main content
Question Protected by stevenvh
edited title
Link
endolith
  • 29k
  • 24
  • 121
  • 184

Why does a resistor need to be on the anode of an LED?

Tweeted twitter.com/#!/StackElectronix/status/64935011303952384
Source Link
Spechal
  • 1.2k
  • 2
  • 9
  • 6

Why does a resistor need to be on the anode?

Please be kind, I am an electronics nub. This is in reference to getting an LED to emit photons.

From what I read (Getting Started in Electronics - Forrest Mims III and Make: Electronics) electrons flow from the more negative side to the more positive side.

In an example experiment (involving a primary dry cell, a SPDT switch, a resistor and an LED) it states that the resistor MUST be connected to the anode of the LED. In my mind, if the electrons flow from negative to positive, wouldn't the electron flow run through the LED before the resistor; thereby making the resistor pointless?