Timeline for Wifi router setup Question regarding amperage/voltage drop
Current License: CC BY-SA 3.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Feb 3, 2015 at 22:36 | answer | added | Russell McMahon♦ | timeline score: 1 | |
| Feb 3, 2015 at 22:27 | history | edited | Russell McMahon♦ | CC BY-SA 3.0 |
added 34 characters in body
|
| Feb 3, 2015 at 21:38 | comment | added | tomnexus | Yes, voltage drop is only seen under load. If you can find a 5 Ohm resistor, try it as a load. From memory, cat5 cable is 0.1 Ohm/m, so a short circuit will only draw about half an amp through all that wire. Yoir access point is unlikely to work, sorry. | |
| Feb 3, 2015 at 21:29 | review | First posts | |||
| Feb 4, 2015 at 4:52 | |||||
| Feb 3, 2015 at 21:28 | history | asked | Frank | CC BY-SA 3.0 |