Commonmark migration

Source Link

edited Jun 11, 2020 at 15:10

1

I have built an AC/AC cuk converter for an assignment I am doing. It works as such, I provide 50V AC in and I get an adjustable voltage out from 0V to 50V AC, depending on the duty cycle of the PWM that I gate to the MOSFETs. It is designed to supply a max of 1A rms to the load. I have included a schematic below, drive circuit as not been shown. [![IMG][1]][1]

It works extacly as I have explained. However, I would like to incorporate some sort of rudementry simple short circuit protection.

Any ideas would help, thanks. [1]: https://i.sstatic.net/nx1Ps.png

broken image fixed (click 'rendered output' or 'side-by-side' to see the difference; image retrieved via Wayback Machine); for more info, see https://gist.github.com/Glorfindel83/9d954d34385d2ac2597bbe864466259f

Source Link

edit approved Mar 19, 2020 at 21:57

Glorfindel

1.2k
3
15
20

I have built an AC/AC cuk converter for an assignment I am doing. It works as such, I provide 50V AC in and I get an adjustable voltage out from 0V to 50V AC, depending on the duty cycle of the PWM that I gate to the MOSFETs. It is designed to supply a max of 1A rms to the load. I have included a schematic below, drive circuit as not been shown. IMG http://i59.tinypic.com/1ze8obc.png[![IMG][1]][1]

It works extacly as I have explained. However, I would like to incorporate some sort of rudementry simple short circuit protection.

Any ideas would help, thanks. [1]: https://i.sstatic.net/nx1Ps.png