Skip to main content
8 events
when toggle format what by license comment
Jul 13, 2015 at 13:50 comment added GR Tech @Lavya Earth it is not considered as a simple conductor. The earth return it is not only a resistive return but also a capacitive return using the capacitance of the earth itself. Again the symbol you are using it is not the symbol for earthing.
Jul 13, 2015 at 6:15 comment added Ignacio Vazquez-Abrams They are the same in operation. How they differ in analysis depends on where you place the ground in the second circuit.
Jul 13, 2015 at 6:13 comment added Lavya @IgnacioVazquez-Abrams What assumptions? an what will happen in practice if we make circuits like the above two? will they perform the same? (assuming earth is wet or whatever it takes for it to be at it's usual best conducting state.
Jul 13, 2015 at 6:11 comment added Lavya @GRTech I am not talking about the common reference point here. In the first circuit, by ground I mean the literal insertion of the wire into earth. From Wikipedia ground article, for example: "In electrical engineering, ground or earth is the reference point in an electrical circuit from which voltages are measured, a common return path for electric current, or a direct physical connection to the Earth.". I am taling about the last type -"a direct physical connection to the Earth". Hence, my question is, will there be a difference if we connect the two end with a conducting wire vs via earth?
Jul 12, 2015 at 19:12 comment added GR Tech This is a sign of common i.e a very low resistance conductor connecting points, and it is used to avoid mesh in a schematic making this easly readable.
Jul 12, 2015 at 16:45 comment added Ignacio Vazquez-Abrams They are the same in operation, but they are the same in analysis only if a specific assumption is made.
Jul 12, 2015 at 16:20 answer added user76844 timeline score: 1
Jul 12, 2015 at 16:11 history asked Lavya CC BY-SA 3.0