Timeline for What is the correct / better way to align two connectors across boards?
Current License: CC BY-SA 3.0
2 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Aug 18, 2015 at 13:35 | comment | added | Peter Smith | +1. The tolerance stack-up for multiple connectors between rigid PCBs is a very nasty problem, particularly in a hi-reliability world (where I currently am) but it can be just as big an issue in consumer equipment. Adding more connectors gives an exponential problem. | |
| Aug 18, 2015 at 8:26 | history | answered | Theran | CC BY-SA 3.0 |