Skip to main content
Electrical Engineering

Return to Question

added 23 characters in body
Source Link
Kar
Kar
  • 1.6k
  • 2
  • 16
  • 37

I'm very new to Eagle so please bare with me. I'm hoping to check and change the properties of of the holes on a PCB, but I can't seem to right click them. I've removed all layers except for the hole and drill ones.

enter image description here

The biggest issue is that, after converting to gerber, the drill file blows up the area by almost 100x (from 0.5in^2 to 70in^2), so I wonder if my holes are problematic.

Thanks

I'm very new to Eagle. I'm hoping to check and change the properties of of holes, but I can't seem to right click them. I've removed all layers except for the hole and drill ones.

enter image description here

The biggest issue is that, after converting to gerber, the drill file blows up the area by almost 100x (from 0.5in^2 to 70in^2), so I wonder if my holes are problematic.

Thanks

I'm very new to Eagle so please bare with me. I'm hoping to check and change the properties of the holes on a PCB, but I can't seem to right click them. I've removed all layers except for the hole and drill ones.

enter image description here

The biggest issue is that, after converting to gerber, the drill file blows up the area by almost 100x (from 0.5in^2 to 70in^2), so I wonder if my holes are problematic.

Thanks

Source Link
Kar
Kar
  • 1.6k
  • 2
  • 16
  • 37

How to change properties of holes?

I'm very new to Eagle. I'm hoping to check and change the properties of of holes, but I can't seem to right click them. I've removed all layers except for the hole and drill ones.

enter image description here

The biggest issue is that, after converting to gerber, the drill file blows up the area by almost 100x (from 0.5in^2 to 70in^2), so I wonder if my holes are problematic.

Thanks