This is what happens when "good" solutions aren't cheap enough: it's an off-the-shelf 12V 1A geared motor (solddesigned for brass case preparation), clamped to the drill's drive shaft with a rigid coupling. On highest reduction pulleys the chuck is turning about 50rpm. Beauty in kludginess?
This is what happens when "good" solutions aren't cheap enough: it's an off-the-shelf 12V 1A geared motor (sold for brass case preparation), clamped to the drill's drive shaft with a rigid coupling. On highest reduction pulleys the chuck is turning about 50rpm. Beauty in kludginess?
This is what happens when "good" solutions aren't cheap enough: it's an off-the-shelf 12V 1A geared motor (designed for brass case preparation), clamped to the drill's drive shaft with a rigid coupling. On highest reduction pulleys the chuck is turning about 50rpm. Beauty in kludginess?
This is what happens when "good" solutions aren't cheap enough: it's an off-the-shelf 12V 1A geared motor (sold for brass case preparation), clamped to the drill's drive shaft with a rigid coupling. On highest reduction pulleys the chuck is turning about 50rpm. Beauty in kludginess?
