Timeline for Interface 10 image sensors to Linux CPU
Current License: CC BY-SA 3.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Apr 6, 2016 at 18:03 | answer | added | Krunal Desai | timeline score: 2 | |
| Apr 6, 2016 at 15:03 | comment | added | uint128_t | 10*320*240*8bit*30/s = 23Mbps. Not a huge bandwidth, but still large enough to be significant. I'd agree with Igor, an FPGA coupled to some memory is the best way to interface this, it will move the processing load away from the processor, and can interface very flexibly. Because of the relatively slow speeds and low bandwidth, your RAM and FPGA needn't be expensive or super fast. | |
| Apr 6, 2016 at 11:08 | comment | added | IgorEE | While i think you coukd probably multiplex all cameras to a single camera interface on the processor (lvds multiplexer if the cameras use lvds) I think a better solution is to use an FPGA for this job. FPGA coupled to some memory can easily (and if required even simultaneously) acquire images from the cameras and then pass them onto the application processor (Linux) any way you wish. | |
| Apr 6, 2016 at 10:55 | history | asked | Kozuch | CC BY-SA 3.0 |